ECCN 3A002

• a.Recording equipment and oscilloscopes, as follows:
• 6. Digital data recorders having all of the following:
• 6.a. A sustained 'continuous throughput' of more than 6.4 Gbit/s to disk or solid-state drive memory; and
• 6.b. "Signal processing" of the radio frequency signal data while it is being recorded;
• 7. Real-time oscilloscopes having a vertical root-mean-square (rms) noise voltage of less than 2% of full-scale at the vertical scale setting that provides the lowest noise value for any input 3dB bandwidth of 60 GHz or greater per channel;
• c."Signal analyzers" as follows:
• 1. "Signal analyzers" having a 3 dB resolution bandwidth (RBW) exceeding 40 MHz anywhere within the frequency range exceeding 31.8 GHz but not exceeding 37 GHz;
• 2. "Signal analyzers" having a Displayed Average Noise Level (DANL) less (better) than −150 dBm/Hz anywhere within the frequency range exceeding 43.5 GHz but not exceeding 90 GHz;
• 3. "Signal analyzers" having a frequency exceeding 90 GHz;
• 4. "Signal analyzers" having all of the following:
• 4.a. 'Real-time bandwidth' exceeding 170 MHz; and
• 4.b. Having any of the following:
• 4.b.1. 100% probability of discovery, with less than a 3 dB reduction from full amplitude due to gaps or windowing effects, of signals having a duration of 15 µs or less; or
• 4.b.2. A 'frequency mask trigger' function, with 100% probability of trigger (capture) for signals having a duration of 15 µs or less;
• d.Signal generators having any of the following:
• 1. Specified to generate pulse-modulated signals having all of the following, anywhere within the frequency range exceeding 31.8 GHz but not exceeding 37 GHz:
• 1.a. 'Pulse duration' of less than 25 ns; and
• 1.b. On/off ratio equal to or exceeding 65 dB;
• 2. An output power exceeding 100 mW (20 dBm) anywhere within the frequency range exceeding 43.5 GHz but not exceeding 90 GHz;
• 3. A "frequency switching time" as specified by any of the following:
• 3.b. Less than 100 µs for any frequency change exceeding 2.2 GHz within the frequency range exceeding 4.8 GHz but not exceeding 31.8 GHz;
• 3.d. Less than 500 µs for any frequency change exceeding 550 MHz within the frequency range exceeding 31.8 GHz but not exceeding 37 GHz;
• 3.e. Less than 100 µs for any frequency change exceeding 2.2 GHz within the frequency range exceeding 37 GHz but not exceeding 75 GHz; or
• 3.g. Less than 100 µs for any frequency change exceeding 5.0 GHz within the frequency range exceeding 75 GHz but not exceeding 90 GHz.
• 4. A single sideband (SSB) phase noise, in dBc/Hz, specified as being any of the following:
• 4.a. Less (better) than −(126 + 20 log10 F−20log10f) for anywhere within the range of 10 Hz ≤ F ≤ 10 kHz anywhere within the frequency range exceeding 3.2 GHz but not exceeding 90 GHz; or
• 4.b. Less (better) than −(206−20log10f) for anywhere within the range of 10 kHz < F ≤ 100 kHz anywhere within the frequency range exceeding 3.2 GHz but not exceeding 90 GHz;
• 5. An 'RF modulation bandwidth' of digital baseband signals as specified by any of the following:
• 5.a. Exceeding 2.2 GHz within the frequency range exceeding 4.8 GHz but not exceeding 31.8 GHz;
• 5.b. Exceeding 550 MHz within the frequency range exceeding 31.8 GHz but not exceeding 37 GHz;
• 5.c. Exceeding 2.2 GHz within the frequency range exceeding 37 GHz but not exceeding 75 GHz;
• 5.d. Exceeding 5.0 GHz within the frequency range exceeding 75 GHz but not exceeding 90 GHz; or
• 6. A maximum frequency exceeding 90 GHz;
• e.Network analyzers having any of the following:
• 1. An output power exceeding 31.62 mW (15 dBm) anywhere within the operating frequency range exceeding 43.5 GHz but not exceeding 90 GHz;
• 2. An output power exceeding 1 mW (0 dBm) anywhere within the operating frequency range exceeding 90 GHz but not exceeding 110 GHz;
• 3. 'Nonlinear vector measurement functionality' at frequencies exceeding 50 GHz but not exceeding 110 GHz; or
• 4. A maximum operating frequency exceeding 110 GHz;
• f.Microwave test receivers having all of the following:
• 1. Maximum operating frequency exceeding 110 GHz; and
• 2. Being capable of measuring amplitude and phase simultaneously;
• g.Atomic frequency standards being any of the following:
• 1. "Space-qualified";
• 2. Non-rubidium and having a long-term stability less (better) than 1 × 10−11/month; or
• 3. Non-"space-qualified" and having all of the following:
• 3.a. Being a rubidium standard;
• 3.b. Long-term stability less (better) than 1 × 10−11/month; and
• 3.c. Total power consumption of less than 1 Watt.
• h."Electronic assemblies," modules or equipment, specified to perform all of the following:
• 1. Analog-to-digital conversions meeting any of the following:
• 1.a. A resolution of 8 bit or more, but less than 10 bit, with a "sample rate" greater than 1.3 Giga Samples Per Second (GSPS);
• 1.b. A resolution of 10 bit or more, but less than 12 bit, with a "sample rate" greater than 1.0 GSPS;
• 1.c. A resolution of 12 bit or more, but less than 14 bit, with a "sample rate" greater than 1.0 GSPS;
• 1.d. A resolution of 14 bit or more but less than 16 bit, with a "sample rate" greater than 400 Mega Samples Per Second (MSPS); or
• 1.e. A resolution of 16 bit or more with a "sample rate" greater than 180 MSPS; and
• 2. Any of the following:
• 2.a. Output of digitized data;
• 2.b. Storage of digitized data; or
• 2.c. Processing of digitized data;

6 items reserved by BIS (not shown)