ECCN 1C202
NPATAlloys other than those controlled by 1C002.b.3 or 1C002.b.4 as follows .
What This ECCN Covers
ECCN 1C202 controls alloys, other than those controlled by 1C002.b.3 or 1C002.b.4, meeting the strength and form criteria in the entry — typically certain high-strength aluminum and titanium alloys. These materials have aerospace and proliferation-relevant uses and are controlled for Nuclear Nonproliferation and Anti-Terrorism reasons.
Who needs to check this?
Producers and exporters of high-strength aluminum and titanium alloy tube and bar stock for aerospace and industrial use.
Compliance tip
Rule out 1C002 first, then confirm the alloy strength, geometry, and form against 1C202. With NP among the reasons, apply nuclear end-use diligence and verify the Country Chart before relying on a license exception.
Items Covered
- 1. "Capable of" an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); and
- 2. In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm;
- b.Titanium alloys having both of the following characteristics:
- 1. "Capable of" an ultimate tensile strength of 900 MPa or more at 293 K (20 °C); and
- 2. In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm.
Control Reasons
Items controlled for nuclear nonproliferation reasons.
Items controlled for anti-terrorism reasons. Most items on the CCL have AT controls.
Disclaimer
This information is for reference only. For official classifications, consult BIS or a qualified export control professional.