ECCN 1C118
MTATTitanium-stabilized duplex stainless steel (Ti-DSS), having all of the following characteristics .
What This ECCN Covers
ECCN 1C118 controls titanium-stabilized duplex stainless steel (Ti-DSS) meeting all of the composition and form criteria in the entry. This corrosion-resistant specialty steel has process-industry and proliferation-relevant uses and is controlled for Missile Technology and Anti-Terrorism reasons.
Who needs to check this?
Specialty-steel producers and exporters, and fabricators supplying corrosion-resistant vessels and piping to chemical and process industries.
Compliance tip
Classification depends on the exact composition, form, and dimensions in the entry — confirm your material qualifies. The MT reason limits license exceptions; verify the Country Chart and screen for missile-related end uses.
Items Covered
- 1. Containing 17.0-23.0% by weight of chromium and 4.5-7.0% by weight of nickel;
- 2. Having a titanium content of greater than 0.10% by weight; and
- 3. A ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10% by volume (according to ASTM E-1181-87 or national equivalents) is austenite; and
- b.Having any of the following forms:
- 1. Ingots or bars having a size of 100 mm or more in each dimension;
- 2. Sheets having a width of 600 mm or more and a thickness of 3 mm or less; or
- 3. Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less.
Control Reasons
Items controlled under the Missile Technology Control Regime (MTCR).
Items controlled for anti-terrorism reasons. Most items on the CCL have AT controls.
Disclaimer
This information is for reference only. For official classifications, consult BIS or a qualified export control professional.