ECCN 1A008
NSUNATCharges, devices and components, as follows .
Items Covered
- a.High explosives and related equipment specially designed for military use;
- b.Explosive devices or charges in this entry that utilize USML controlled energetic materials (See 22 CFR 121.1 Category V), if they have been specifically designed, developed, configured, adapted, or modified for a military application;
- c.Shaped charges that have all of the following a uniform shaped conical liner with an included angle of 90 degrees or less, more than 2.0 kg of controlled materials, and a diameter exceeding 4.5 inches;
- d.Detonating cord containing greater than 0.1 kg per meter (470 grains per foot) of controlled materials;
- e.Cutters and severing tools containing greater than 10 kg of controlled materials;
- f.With the exception of cutters and severing tools, devices or charges controlled by this entry where the USML controlled materials can be easily extracted without destroying the device or charge; and
- g.Individual USML controlled energetic materials in this entry, even when compounded with other materials, when not incorporated into explosive devices or charges controlled by this entry or 1C992.
- a.'Shaped charges' having all of the following:
- 1. Net Explosive Quantity (NEQ) greater than 90 g; and
- 2. Outer casing diameter equal to or greater than 75 mm;
- b.Linear shaped cutting charges having all of the following, and specially designed "components" therefor:
- 1. An explosive load greater than 40 g/m; and
- 2. A width of 10 mm or more;
- c.Detonating cord with explosive core load greater than 64 g/m;
- d.Cutters, not specified by 1A008.b, and severing tools, having a NEQ greater than 3.5 kg.
Control Reasons
NSNational Security
Items controlled for national security reasons under multilateral export control regimes.
Column 1: YesColumn 2: No
UNUnited Nations
Items controlled pursuant to United Nations Security Council mandates.
Column 1: YesColumn 2: No
ATAnti-Terrorism
Items controlled for anti-terrorism reasons. Most items on the CCL have AT controls.
Column 1: YesColumn 2: No
Disclaimer
This information is for reference only. For official classifications, consult BIS or a qualified export control professional.